The Sensplorer Smoke Detector Sensor continuously monitors the value measured by the ambient air pressure sensor on it.. Sensplorer modules are connected to the sensor ports via CAT5 / 6 UTP cable. It also takes its energy via this line again. The maximum distance can be extended up to 200 meters. The limit values (lower and upper limit) can be set for each of the sensors on it. Each sensor can be defined as a two-stage limit value definition, a NOTIFY for a sensor, and an ALARM limit for another. For each limit and condition, the message can be sent separately (SMS, e-mail, SNMP trap, Syslog)
All sensor values can always be monitored over the TCP / IP network
Sensplorer Smoke Detection Sensor, the environment in which it is installed
Follows the air quality
Sensplorer SPx-9001 is the product family SMOKE DETECTOR SENSOR module. There is also a SMOKE DETECTOR SENSOR on it.
Sensor ports on the SensplorerX Main Module or Sensor Expansion modules connected.
Sensplorer sensors are connected to the sensor ports on the main module or to the sensor ports of the 16-port sensor expansion CANbus module
The connection of the sensors is made to CAT5e / 6 UTP cable termination and RJ45 connector termination in standard color
Sensor modules also take their energy from the module they are connected to.
Power Input :12V DC / 3A External Power Adapter
Consumption : Max. 05 Watt
Temperature : 0 ° C to +45 ° C
Contact form description text