SPx-S7001 Vibration & Shock Sensor

The Sensplorer Vibration Shock Sensor continuously monitors the value measured by the Vibration & Ahock Sensor on it. Sensplorer modules are connected to the sensor ports via CAT5 / 6 UTP cable. It also takes its energy via this line again. The maximum distance can be extended up to 200 meters. The limit values (lower and upper limit) can be set for each of the sensors on it. Each sensor can be defined as a two-stage limit value definition, a NOTIFY for a sensor, and an ALARM limit for another. For each limit and condition, the message can be sent separately (SMS, e-mail, SNMP trap, Syslog)

All sensor values can always be monitored over the TCP / IP network

Sensplorer Vibration & Shock Sensor, the environment in which it is installed
Follows the Vibration & Shock


Sensplorer SPx-7001 is the product family VIBRATION & SHOCK SENSOR module. There is also a SMOKE DETECTOR SENSOR on it.
Sensor ports on the SensplorerX Main Module or Sensor Expansion modules connected.

Recommended Sensor Planning

  • 1 Air-pressure sensor is recommended for each 30 m2 of raised-floor where cooling is running with  the precision air conditioner
  • 1 Air flow sensor is recommended for each fan of mission critical servers
  • 1 Air quality sensor is recommended for each 30 m2
  • 1 Vibration/Shock sensor is recommended for each cabinet with the critical server or storage 
  • 1 Smoke Detector is recommended for each 20-25 m2
  • 1 Magnetic contact is recommended for each gate/door of the IT room

Sensplorer sensors are connected to the sensor ports on the main module or to the sensor ports of the 16-port sensor expansion CANbus module
The connection of the sensors is made to CAT5e / 6 UTP cable termination and RJ45 connector termination in standard color
Sensor modules also take their energy from the module they are connected to.

Power Input                     :12V DC / 3A External Power Adapter 
Consumption                   : Max. 05 Watt
Temperature                   : 0 ° C to +45 ° C
Low Frequency Range      : 10Hz to 1.000Hz
High Frequency Range     : 4.000Hz to 20.000Hz
Vibration Limit                :  50g
A/D Convertor                 :16BIT
Signal To Noise Ratio       : 80dB

Order Enquiry Form

Contact form description text

  • 6 + 2 =

Leave a Reply

Your email address will not be published. Required fields are marked *