SPx-S5002 Flooding Sensing Sensor

The Sensplorer Flood Sensing Sensor monitors the environment in which it is installed with the water pressure sensor located on it. It makes local water detection by point or sensing cable. Sensor ports located on sensorplorer modules are CAT5 / 6 UTP Cable. It also takes its energy via this line again. The maximum distance can be extended up to 200 meters.
When the water pressure defined as ALARM is detected, the message (SMS, e-mail, SNMP trap, Syslogl) can be sent and, if desired, the automation rule can be defined.

NETWORK ACCESS
All sensor values can always be monitored over the TCP / IP network

FLOOD SENSING DETECTING
The Sensplorer Water Intrusion Sensor constantly monitors water repellency or conductive fluid leaks on the ground where it is installed

Category:
  • Flood Sensing Sensor Product, is the member of the Sensplorer family 
  • Directly use SensplorerX Main Module or Sensor Expansion modules
  • Can be connected to the sensor ports on
  • Local Detection
  • It can make regional perception by cable.

Recommended Sensor Planning

  • 1 sensor for under each air conditioners
  • A sufficient number of sensors around the drain pipes of the air conditioners
  • 1 sensor under the raised floor at the IT room enterance
  • A sufficient number of sensors over the suspended ceiling
  • A sufficient number of sensors under the cable trays coming from vertical electric shafts

Sensplorer sensors are connected to the sensor ports on the main module or to the sensor ports of the 16-port sensor expansion CANbus module
The connection of the sensors is made to CAT5e / 6 UTP cable termination and RJ45 connector termination in standard color
Sensor modules also take their energy from the module they are connected to.

GENERAL FEATURES

Power Input               : 12V DC / 3A External Power Adapter 
Consumption              : Max. 0.5 Watt
Temperature               : 0° C to +60 ° C

TEMPERATURE SENSOR

Measurement Range    : Exists or does not  exist
Response Time           : Max 1 Sec
Time Calibration          : No Calibration Require

Order Enquiry Form

Contact form description text

  • 2 + 83 =

Leave a Reply

Your email address will not be published. Required fields are marked *